Rare Contemporary Dentzel "Flying Horses" Carousel
MGR #10 FOR SALE

List of Included Parts - Drawing - List of Parts to Up-grading

Parts Included in Mechanism Kit:

  1. 2- 6x6x6 base cross pieces
  2. 1- hot-dipped galvanized centerpole baseplate
  3. 1- 12x8.5 diameter centerpole
  4. 4- 4x4x4 centerpole diagonal braces
  5. 4- hot-dipped galvanized centerpole diagonal brace tighteners
  6. 1- hot-dipped galvanized centerpole-race-ring (for splitring bearing)
  7. 1- hot-dipped galvanized splitring bearing with 76-cog, 50-pitch sprocket
  8. 1- painted crown assembly (crown, thrust bearing, electrical commutator slip ring)
  9. 4- hot-dipped galvanized 1/2 diameter 5.5 ring bearing hanging rods
  10. 10- hot-dipped galvanized 1/2 diameter 10.5 guy rods
  11. 10- sweeps with hot-dipped galvanized sweep ends
  12. 10- 9.5x2x3.5 mahogany sweeps
  13. 10- galvanized sweep shield brackets (5 with hooks for animal chain)
  14. 10- hot-dipped galvanized pole tabs
  15. 10- rounding boards
  16. 1- hot-dipped galvanized centerpole pinion rack
  17. 8- menagerie animals (Kangaroo w/Joey, Deer, Boar, Skunk, Cougar, +three more to be determined) + 1 Double Swan Chariot with hanging chains and five swing seats
  18. 10- shields
  19. 5- swing seat hangers to add five more riders making possible a total of 15 riders
  20. 8- painted 1-1/4 diameter steel animal hanging poles with all hanging hardware
  21. 1- ring-catcher with set of rings and spares, ring replacement info provided
  22. 8- animal hanging poles
  23. 10- upper scenic panels
  24. 8- lower scenic panels

DRAWING WITH MEASUREMENTS AND LABELS

DRAWING WITH MEASUREMENTS AND LABELS

Below, List of Parts Which Can Be Made to Add-on to Carousel:

1- drive motor (110v. AC or 12v. DC w/solar charging or foot-pedal)

1- drive shaft with pinion

1- right angle drive

1- hand-crank wheel

1- foot-pedal station

1- on/off controls (with electric motor option)

1- CD sound system

1- set of low voltage lights

10- fancier rounding boards with mirrors and lights

10- fancier shields

10- upper scenic panels (attach to rotating frame, sturdy templates included)

8- lower scenic panels (attach to 6x6 centerpole base, sturdy templates included)

1- clown face ring throwing target

1- crowd control fence with single entry gate (required)

1- pavilion (required)

Contact:
William H. Dentzel
843 53rd Street
Port Townsend WA 98368
Email: bilito@gmail.com

Cell: 360-531-2812

BACK TO CAROUSEL FOR SALE INDEX PAGE